Skip to content

How to Remove Handwheel from Sewing Machine?

How to Remove Handwheel from Sewing Machine

Do you want to know how to remove a handwheel from a sewing machine? If so, you are in the right place! Removing a handwheel from a sewing machine is a relatively straightforward process that requires just a few basic tools and a bit of patience. In this guide, we will explain how to remove a handwheel from a sewing machine easily and safely, so you can get back to your sewing projects as soon as possible.

How to Remove Handwheel from Sewing Machine?

Removing a handwheel from a sewing machine can be a tricky task, but it is possible with the right tools and a bit of patience. Here is a step-by-step guide on how to remove a handwheel from a sewing machine:

  1. Unplug the power cord from the outlet to ensure safety.
  2. Use a flathead screwdriver to remove the screws that hold the handwheel in place. Depending on the type and size of your sewing machine, there may be one or more screws.
  3. Once all the screws have been removed, carefully lift the handwheel away from the machine.
  4. If the handwheel is stuck, use a rubber mallet to gently tap it away from the machine.
  5. Inspect the handwheel for any signs of wear or damage. If necessary, replace the handwheel with a new one.
  6. Reattach the handwheel to the machine, making sure all the screws are securely tightened.
  7. Plug the power cord back into the outlet and test the machine.

By following these steps, you should be able to safely remove and replace the handwheel from a sewing machine. If you have any questions or need additional help, don’t hesitate to reach out to a professional for assistance.

See also  Why Is My Sewing Machine Making a Knocking Noise?

Related article:

nv-author-image

Jacky Butchers

Hi, I'm Jacky Butchers, managing and writing on LetMeSewing. I worked in the field for almost a decade, and I holds a degree in Textile Engineering from the University of the Punjab. I've an extensive experience with a wide range of sewing machines, and I'm is happy to share my skills with those just starting out.